Crystalline Waterproofing Mortar

Cement-based, positive and negative water pressure resistant, cement based surfaces, which can be transferred to the capillary space, one component, is crystalline waterproofing mortar.
PRODUCT ADVANTAGES
- Resistance to negative and positive water pressure,
- The ability to transfer cementitious surfaces to the capillary cavities,
- Easy and convenient application.
SURFACE PREPARATION
- The surface to be applied must be clean, smooth and sound. Powder, lime paint residues,  mold oils and so on. the application area should be cleaned with a wire brush.
- Important disturbances and holes on the surface, from the application of Crystallized Waterproofing Filler     min. 24 hours ago Thick Repair Mortar; fast application or sulphate resistance is desired     should be repaired with appropriate repair mortar.
- Very porous surfaces, such as gross concrete, cement based plaster, must be wetted with clean water,    
it should be expected until the water layer disappears in order to remain moist.
PREPARATION OF HARVESTER
25 kg of Crystallized Water Insulation for each storey is added by adding 6,5-7 lt clean water     it takes about 2-3 minutes to reach a homogenous consistency with the aid of a revolving mixer. mix.
- Crystallized Waterproofing Must be applied to the entire surface with a minimum of 2 coats using a mulcher brush or trowel.
- Each layer application must be perpendicular to the previous one. Wait at least 6 hours between coats.
- The following coat application is applied 12 hours or more after the application of the previous coat     the surface is again moistened before application.
APPLICATION SURFACES
Interior and Exterior Wall;
- Cement based plaster
- ConcreteInterior and Exterior Ground;
- Cement based screed
- Concrete
APPLICATION DETAILS
- Cement based plaster and screeds can be applied on gross concrete.
- Consult us for all other surfaces.
- Application thickness is 2-3 times.
- The number of times that can be applied is 2-3 times.
- The allowable duration of the expenditure is maximum 30 minutes.
- Waiting time between coats is at least 6 hours.
- The minimum period of time that must be anticipated for final coat application on crystallized waterproofing mortar is 7 days.
SURFACE AND ENVIRONMENTAL TEMPERATURE
- The surface and ambient temperature must be between + 5 ° C and + 30 ° C during application.
CONSUMPTION
- 2-3 kg / m2 for 2 mm thickness
PACKAGING
- Kraft bag of 25 Kg
SHELF LIFE
- Can be stored for 12 months in a dry place in original packages.
- If not used, the mouth of the packaging should be tightly closed.
PALLET MEASUREMENT
- 107x107 cm.
COLOR
- Gray