Water-Based Silicone Exterior Paint

APPLICATION FIELD
- It can be used safely in concrete, gas concrete, briquette, brick, plaster and similar mineral surfaces.
- It should not be applied on elastic paint systems.
FEATURES
- Plaster, concrete plaster and lime adhere to and adhere to the surface.
- It is water based and has high breathing ability.
- Matte and smooth appearance.
- Has very high covering ability.
- Does not swell and spill.
- It saves time and labor due to high spreading power on the surface during application.
SURFACE PREPARATION
- The surface to be applied must be cleaned from all kinds of grease, dirt, loose and swollen strata,
- In glassy and glossy textures, a surface must be formed to hold the paint.
- The capillary cracks must be filled with an external facing paste.
- Plastered, new and solid surfaces; Filler Primer should be applied as single layer.
- Old painted, very calcified, absorbent, weak etc. On loosely textured surfaces, the floor must be saturated.
- It is necessary to apply primer on cement based decorative plaster used in heat insulation system.
APPLICATION FORM
- At least 24 hours after primer application, it should be applied in two layers with water diluted 10-15% by volume.
- Wait at least 6 hours between floors depending on climate conditions.
- No application on rainy days.
DYEABLE AREA
In practice, depending on the surface;
- When using the Newsan Filler Primer, 2 kg depending on the surface, 1 kg. with 2.5-3.5 m 2,
- When using primer, depending on the single layer surface, 1 kg to 5 - 7 m2 area
DRYING TIME
- Initial Drying: 30 min.
- Second coat Application: 2-3 hours
- Last Dry: 12 hours
CONSUMPTION
- With 1 kg, you can paint single layer 5-7 m2 area depending on application style and floor.
PACKAGING
- 20 Kg. / 10 Kg. / 3.5 Kg. PE bucket
STORAGE
- It can be stored for 1 year in unopened package, in cool place, protected from direct sunlight and frost.