Epoxy Primer

SURFACES TO BE APPLIED
- Two component reaction based on epoxy resin based epoxy resin and curing with polyamide hardener, high solidity,
- Zinc phosphate-added epoxy anticorrosive protective primer with good adhesion properties.
- It is used as anticorrosive primer in areas where high corrosion resistance is required in priming of water, sea water, chemicals, all kinds of wood, metal and mineral surfaces exposed to abrasion.
- Excellent adhesion on steel, galvanized and aluminum surfaces.
- General industry, machinery manufacturers, metal protection and marine applications performance is good.
ADVANTAGES
- Good adhesion to light metals and hair.
- Any air and oven to be applied on it should form a smooth surface for the dried topcoats.
APPLICATION DETAIL
- The surfaces to be applied should be cleaned from any material to reduce adherence.
- Metal surfaces should be sandblasted at least Sa2½     Should be primed with Epoxy Primer within 6 hours.
- 7 parts Epoxy Primer and 1 part Epoxy Primer Hardener are mixed.
- Wait 10-15 minutes.
- Depending on the surface and ambient temperature to be applied, it is thinned by 10-15% with Epoxy Thinner.
THINNING / MIXING RATIO
- 10-15% Epoxy Thinner should be used for thinning.
- Mixture 17.5 kg. Epoxy Primer Paint + 2.5 Kg. Epoxy Primer Hardener.
DYEABLE AREA
- Depending on the application, 100-150 gr / m2 (one coat) area can be covered.
- Practical coverage area varies with surface roughness and amount of splash losses
DRYING TIME
- Depending on the thickness, the touchscreen is 5-6 hours.
- Wait at least 20 hours to coat on.
- Mechanical resistance reaches 4-6 days.
CONSUMPTION
- 100-150 gr / m2 (one coat)
RECOMMENDED APPLICATIONS
- Brush, roller, airless, pistole.
PACKAGING
- 20 kg. (17.5 kg paint + 2.5 kg hardener)
STORAGE
- In direct sunlight on original packaging in closed protected areas    and stored frozen.
- Storage life is 1 year in packaging.