Bituminous Solvent Based Liquid Membrane / NW 1K

Rubber based cold applied solvent based liquid waterproofing material.
Features 
-Modified, bituminous and solvent based, one component, ready-to-use, liquid membrane used in water and mildew. After evaporation of the solvent in the inner layer, it strongly adheres to the surface where it is applied, forming a water resistant and super layer.
Usage Areas
-It is against the nematode and leakage,
- On the walls and rest-In the ground, drainage and foundation excavations,
-The terrace is on the roof, on the balconies, on the water channels and in the hidden rivers,
-It is used under coating in isolation of pools against water and moisture.
Benefits
It can be easily applied by everyone.
- Creates a complete and continuous insulation layer.
-He's very elastic.
- It's ready.
- It should be applied cold.
- No heating or thinning required.
-Rapid drying
Application Recommendations
- Applied to the side of the site where it will be in contact with water only.
- It's a ready material-The heating does not require thinning.
- Trowel with trowel. Application by brush is 1lt per bucket to refine when desired. cellulosic thinner is sufficient.
- Can be applied with brush, spatula and pressureless sprayer.
- Used as primer (Newran Brand Solvent Based Primer) to provide strong adhesion, to purify from dust and extend the life of application.
- At least one day is required depending on the weather conditions during intercoat application.
- The application of the second layer is applied to the crossing of the first layer.
- For good waterproofing, 2 coats of filigree are required on the tables.
- Excellent results are obtained by reinforcing with high loaders such as polyester felt, mesh, isolation cloth.
- Do not thin with water.
- Keep it away from flammable, combustible materials during application.
- Definitely not used in connection equipment for dilation.
Consumption Amount
- It should be used as it will be 500 gr / m2.
- At least two coats should be applied.
- Easy to use by everyone.
Retention Terms and Duration
- The top must be stored in closed areas at temperatures of 0 - 30 C and at most 3 times above the bucket.
- If they need to be stored for a long time in the open, they must be covered to protect them from the sun's rays.
- The product cover should be closed at the end of the application.
-If it is stored dry and cool in its original unopened package, it is 12 months.
Health and Safety Alerts
- Do not contact with direct fire.- Since it contains solvent, it does not smoke during application, fire is not incurred and tools to produce sparks are not used.
- The bucket lid should not be left open.
- Do not touch the eye and the skin.
Packaging shape In
-18 kg tin package