P 4000 Membrane

APP Based (Plastomeric) Waterproofing Membranes (Polyester Felt carrier)
Description of the Product
APP-based (atactic polypropylene) additives,
Spunbond polyester felt carrier 150gr/m2/180gr/m²,
Both side coated with polyethylene film
Areas of Use
Single or double layered in the water and steam isolation of wet places
Single or double layered in the pressurized subsurface water problems
Single or double layered in the rain gutters, balconies, flower containers, concrete flume and garden terrace, water tanks, ponds, sewage treatment plants, carparks, hidden creek isolations
Single or double layered in the retaining and isolation of basement walls
In terraces and pitched roofs
Application Type
Applied by using welding porch flame fully, dotted or free by leaving mounting allowance of 10 cm at the joints and 15 cm. at roll ends.
Thickness
4 mm
Roll Length
10 mt.
Storage & Protection
Rolls should be stored vertically in closed areas.
Do not expose to ultraviolet lights and sudden temperature changes.
If rolls are to be stored in open air for a long time, they should be covered in order to protect them against sunlight.
No drilling and cutting processes should be implemented after application.
If the rolls will be stacked without pallets, they should not be are piled up.
When stacking on pallets, maximum to pallets can be stored on each other, provided that they are separated with a particle board.
In the terraces, walked on, they must be protected with floor covering.